|
Post by Kam on Aug 15, 2018 0:41:59 GMT -8
Hello everyone
Welcome to Ansoko discuss forum.
My name is Kam, I am the manager of this forum and the member of Ansoko Support Team.
You could post anything you want to share in this forum or ask any questions regarding a product of Ansoko.
Have a good day!
|
|
|
Post by Kathy on Nov 20, 2019 10:00:54 GMT -8
Hello - I am wondering how to set up the scan function on the radios. I have the CHIRP software and the programming cable but I'm not sure how to set it up. I want to have only 1 of the channels able to scan and hear all of the other channels but not all of the other channels to hear each other. Help please and thank you.
|
|
|
Post by Kam on Nov 20, 2019 19:10:12 GMT -8
Hello - I am wondering how to set up the scan function on the radios. I have the CHIRP software and the programming cable but I'm not sure how to set it up. I want to have only 1 of the channels able to scan and hear all of the other channels but not all of the other channels to hear each other. Help please and thank you. Hi Kathy CHIRP currently doesn't support the scan feature accessing, you'll need the specific programming software in the CD to access the scan feature options. Please visit the link below for the instructions on connecting your radio and program with the specific software: images-na.ssl-images-amazon.com/images/I/81TBkDPf5nL.pdfPlease follow the steps to download the data from your radios and go step 11, as shown in the image below: Please change the highlighted options to the same as shown in the image. Then back to the frequency list to select YES in the Scan Add column for all channels. Once these are done, please upload the data to all of your radios. When the upload is complete, turn on one of the radios to channel 16, wait a few seconds, the radio will enter scan mode automatically. It will scan the active channels on other radios from channel 1 to channel 16. When you need to temporarily shut off the scan feature, you don't need a computer to do this, just turn the radio to channel 16, hold the PTT and MONI button at the same time and turn the radio on, the voice prompt will tell you whether the scan is ON or OFF. Any other questions or concerns please feel free to post on here or email to support@ansoko.com
|
|
|
Post by Barrett on Dec 25, 2020 2:07:56 GMT -8
If you've been asking if cbd oil for cats is really a thing, then now you have found the answer.
It is all dependent on a number of factors, not the least of which are your cat's particular character type.
Before jumping in with both feet, it's worth being clear about what cbd for cats really is and what it will. It's a distillation process which leaves the CBD oil almost unnoticeable in its raw form, which makes it exceptionally beneficial to people seeking to furnish their pet cats with safe, effective pain relief. But it's important to note that not all formulas are devised in order to be beneficial for certain cats, so it is always important to read the label and also understand the way the formula was formulated.
The fact is that the majority of CBD oil for cats is formulated with the most effective procedure of CBD extraction known to science, meaning you could be certain that it will provide your cat the very best pain relief, with no potentially harmful side effects.
As any vet will tell you, the brief answer is"Yes". Should you really care about your cat's health, the answer is completely"Yes". But please bear in mind that the reason it works so well is because it comprises all natural ingredients, unlike a number of other pet products out there.
|
|
|
Post by towanda on Feb 4, 2021 13:00:20 GMT -8
We just recently bought these and set them up. Now one is constantly saying change battery over and over and it's not even 2 weeks old. Should I just take it off the base and let the charge run out???
|
|